ERGONOMIC WORK CENTERS
Mayline VariTask Workcenter is the solution for a comfortable working environment. VariTask workcenter was designed and developed on the premise that work environments should adapt to the individual rather than expecting workers to adapt to uncomfortable and nonproductive situations. VariTask multi-functional workcenters provide varying degrees of adjustability, to both work surface height and tilt, for maximum user comfort and productivity in both dedicated and multi-user environments.
The VariTask system also features optional tilt adjustment on both the front and rear pedestals. On rectilinear models, the front surface is available with either manual or power tilt, from horizontal to +25°. This flexibility allows convenient and comfortable adjustment of the keyboard or other data entry devices on the primary surface.
The rear surface on all models comes with or without power tilt. This function provides ideal viewing of monitors whether the operator is seated or standing, and reduces eye strain, glare, and muscular stress. The tilt feature offers +10°/-15° of adjustability.
Power height adjustment on front and rear pedestals.
MAY25300L 24" X 48" Work Surface 3265.00
18" X 48" Rear Shelf
No front or rear tilt.
MAY25305L 24" X 48" Work Surface 4084.00
18" X 48" Rear Shelf
No front tilt. Power rear tilt.
MAY25310L 24" X 48" Work Surface 3470.00
18" X 48" Rear Shelf
Manual front tilt. No rear tilt.
MAY25315L 24" X 48" Work Surface 4250.00
18" X 48" Rear Shelf
Manual front tilt. Power rear tilt.
MAY25355L 24" X 48" Work Surface 4826.00
18" X 48" Rear Shelf
Power front tilt. Power rear tilt.
MAY2110V Monitor Clamp Brackets 91.00
For models with rear tilt.
Varitask is also available in models with 30" deep front work surface.
VariTask Adjustable Corner Workcenter with power height adjustment. Provides up to 15 square feet of working area. It is useful in both freestanding and panel systems configurations, this unit can be tailored to fit 42", 45" and 48" panel systems. 18" X 29" rear shelf.
MAY47300L No front or rear tilt. 3672.00
MAY47305L No front tilt. Power rear tilt. 4491.00
MAY48200L Stationary front work surface 2547.00
MAY48205L Stationary front work surface 3326.00
MAY12565L Single Pedestal 2234.00
Single Pedestal Tables are ideal for use in an environment where extensive data entry is the primary task. Whether used as an operator-assist station or in general customer service applications, VariTask provides work surface adjustability for maximum comfort and productivity in an economical, electrically powered unit. Power height adjustment 26" - 40". No tilt adjustment.
MAY12548L 30" X 48" Work Surface 1980.00
16" X 48" Rear Shelf
MAY12560L 30" X 60" Work Surface 2077.00
16" X 60" Rear Shelf
VariTask Single Pedestal Data Station offers power height control with integral keyboard adjustment. This dual surface, yet single pedestal station provides rear work surface height adjustability from 26" to 40" with front surface keyboard adjusting 5.75" below to 7" above the rear surface (a total 20.25" to 47" height range).
MAY12730WL 18" X 30" Work Surface 1980.00
12" X 30" Articulating Keyboard
MAY12736WL 18" X 36" Work Surface 2088.00
12" X 36" Articulating Keyboard
MAY12748WL 18" X 48" Work Surface 2255.00
12" X 48" Articulating Keyboard
Please call The Complete Line for more information regarding the
VariTask Adjustable Work centers.
COMPUTER FURNITURE
Mayline DomainÔ is America's most comfortable, most flexible, and most economical furniture for computer aided design. The base unit is the ideal workstation for "task-specific" jobs. It gives you all the work space you need to accomodate the basics, including a large 19" CRT, input devices and a document holder.
As your business grows and as job descriptions change, you can economically upgrade the Domain with additional desk, reference, and storage space. Domain's modular component system lets you add other components in any pattern or cluster that suits your needs. Melamine finish.
Freestanding Corner Unit
MAY9C838 Pie Shaped Corner 232.00
MAY9C842 42" X 30" 431.00
MAY9C845 45" X 30" 468.00
MAY9C848 48" X 30" 505.00
Reference Desks - 30" Depth
MAY9R936 36"W X 30"D X 29"H 327.00
MAY9R948 48"W X 30"D X 29"H 349.00
MAY9R960 60"W X 30"D X 29"H 385.00
MAY9R936 36"W X 30"D X 29"H 419.00
With 45° Tilt Top
MAY9R236 36"W X 30"D X 29"H 419.00
MAY9R248 48"W X 30"D X 29"H 453.00
Adjustable Tables
MAY9T948 48" X 30" Height Adjusts 23" to 30"
Without Casters 611.00
MAY9T949 48" X 30" Height Adjusts 25" to 32"
With Casters 636.00
MAY9T248 48" X 30" Height Adjusts 23" to 30"
Without Casters; 0 - 45° tilt top 748.00
AY9T249 48" X 30" Height Adjusts 25" to 32"
With Casters; 0 to 45° tilt top 771.00
Desk Hutch
MAY9H648 48" Hutch for 9R948 268.00
MAY9H660 60" Hutch for 9R960 289.00
Printer Stand
MAY9R930 W 30" X D 30" X H 29" 308.00
MAY9R931 W 30" X D 30" X H 29" 314.00
(without paper slot)
Domain Bookshelves - 7 1/8" Clearance 13" Deep.
MAYES736 36" 136.00
MAYES748 48" 156.00
MAYES760 60" 211.00
Domain Bookshelves - 12" Clearance 13" Deep.
MAYES836 36" 142.00
MAYES848 48" 176.00
MAYES860 60" 216.00
Accessories
MAY2D902 Articulated Document Holder 288.00
MAY9D100 D-Size Drawer 358.00
MAY2D924 Cable Channel for 36" Desk 30.00
MAY2D936 Cable Channel for 48" Desk 35.00
MAY2D948 Cable Channel for 60" Desk 47.00
MAY2D960 Cable Channel for 72" Desk 55.00
Please call The Complete Line for more information regarding the Mayline Domain Computer Furniture.
Wire LAN Management System has a silver metallic finish to complement your high-tech environment. Includes Keyboard Tray. 48" X 28¾" X 72".
SAF5280SL LAN Management System 299.00
SAF5281SL Optional Wire Drop Shelf 38.95
SAF5282SL Optional Utility Basket 22.95
SAF5283SL Optional Caster Kit 78.00
Plan Hold PlanMaster PLUS Table can be used at desk or drafting height. It has self-leveling, spring assisted height adjustment with 13 preset drawing angles from flat to 60°. The drawing board has a solid core top with non glare laminated surface. Bookcase, pencil trough, plan drawer and tool drawer are optional accessories.
Standard Color: -Autumn Haze Beige, White, Black, Mist Gray.
PLH351TA950 37½ X 50 697.00
PLH351TA960 37½ X 60 731.00
PLH351TA972 37½ X 72 748.00
Optional Plan Drawer
PLH350DR37 2 X 37½ X 24½ 265.00
Optional Locking Tool Drawer
PLH350DR67 2 X 14½ X 24½ 189.00
Plan Hold Pencil Troughs attach to any PlanMaster Plus or 4-Post Drafting Table.
PLH350PT50 50" 55.00
PLH350PT60 60" 65.00
PLH350PT72 72" 80.00
DRAFTING TABLES
Futur-Matic Drafting Table with contoured chrome legs. This automatic drafting table has a control pedestal with a single pedal toe-operable electric raising mechanism. The tilt angle is horizontal to near vertical with a top height range of 30" to 50". The thermally fused woodgrain melamine top with steel end cleats and pencil trough can tilt from 0° to 90°.
Standard Colors: Desert Sage - M5, Sand Beige _ D5, Gray _ P5, Black _ S5, White _ G5
MAY8695B 37½ X 54 2111.00
MAY8696B 37½ X 60 2136.00
MAY8697B 37½ X 72 2192.00
The Elite Drafting Table is for the professional who demands a lot from a drafting table, but whose working space is limited. The white melamineâ board is balanced by adjustable compensating springs. The incline and elevation movements are simultaneous. Angle adjusts from 0° to 85°. It also features a rigid balanced metal frame and friction locking footrest for comfort.
Black Base
ALVET48-3 36" X 48" 950.00
ALVET60-3 37 ½ " X 60" 995.00
ALVET48-3 37 ½" X 72" 1025.00
White Base
ALVET48-4 36" X 48" 950.00
ALVET60-4 37 ½ " X 60" 995.00
ALVET48-4 37 ½" X 72" 1025.00
Mayline Ranger Steel 4-Post Drafting Table is a high quality economical table has a thermally fused woodgrain melamine top with steel end cleats and front paper apron. The surface adjusts to any angle from 0° to 50°. The shallow plan drawer and locking tool drawer add to its versatility.
Standard Colors: Desert Sage - M5, Sand Beige _ D5, Gray _ P5, Black _ S5, White _ G5
MAY7734B 37½ X 48 674.00
MAY7736B 37½ X 60 729.00
MAY7737B 37½ X 72 843.00
MAY7738B 43½ X 72 926.00
MAY7739B 43½ X 84 1012.00
Mayline Auxiliary Drawer Unit fits under Mayline or Hamilton steel 4-post drafting tables. Expands storage area by providing a supply drawer and a file drawer.
MAY7765 540.00
Workmaster Drafting Table is a versatile table which can be used as a reference table, computer work station or drafting table. The warp free white melamine board adjusts from 0° to 40°. The base is constructed from 1½" X 1½" heavy gauge steel tubing that has an adjustable height from 29" to 46". The handy storage shelf is 12" deep and 42" wide.
Black Base
ALVWM48-3-XB 36 X 48 375.00
ALVWM60-3-XB 37½ X 60 429.00
ALVWM72-3-XB 37½ X 72 445.00
White Base
ALVWM48-4-XB 36 X 48 375.00
ALVWM60-4-XB 37½ X 60 429.00
ALVWM72-4-XB 37½ X 72 445.00
Quattro 4-Post Drafting Table, has a sturdy tubular steel four-post design for stability. Four adjustable hand knobs tilt the table top 26° both ways and 30" to 50" up or down for comfortable working position. Durable ¾" boards have a tough, long lasting melamine surface and feature finished edges to enhance appearance and prevent tears and snags. It also comes with a rubberized footrest for user comfort.
SAF3966 Base 389.00
Tops
SAF3948 37 ½ X 60 146.00
SAF3951 36 X 48 114.00
Pickett 125 Ultima Table is perfect for studio or office. It's clean, contemporary design is enhanced by heavy-gauge steel construction. The table features an easy-to-reach, easy-to-turn height and angle control knob, non-skid floor levelers, and an adjustable footrest. Available in three table top sizes.
PIC125TA936 24 X 36 215.25
PIC125TA942 30 X 42 221.65
PIC125TA948 36 X 48 276.30
Mayline Stowaway Drawing Table is known for its sturdiness due to multiple bracing. The table is light and compact. It folds in seconds for easy storage. It has a self-edge white melamine board. Standard Color: White.
MAY7402AP 24 X 36 195.00
MAY7403AP 30 X 42 205.00
MAY7404P 36 X 48 236.00
Onyx Spacesaver Table is a functional fold-away table with quality features and an attractive tubular construction. The solid, contemporary style base has complete flexibility, sets up in minutes and folds away in seconds, for convenient storage. Telescoping legs adjust from 30" to 40". Table top adjusts from 0° to 45°. The fold-away gate hinge permits foot base legs to fold flat to 5" including board top. Top is made of white malamineâ laminated warp-free drawing surface.
Black Base
ALVONX36-3 24 X 36 139.00
ALVONX42-3 30 X 42 149.00
White Base
ALVONX36-4 24 X 36 139.00
ALVONX42-4 30 X 42 149.00
Correll Folding Reference Table has folding legs for convenient storage. Top is stain-resistant woodgrain laminate that is finished with plastic bumper strip. Standard Color: Oak, Walnut, Gray and Granite Gray.
OFWCF3060M 30 X 60 103.00
OFWCF3072M 30 X 72 111.00
OFWCF3096M 30 X 96 135.00
WOOD DRAFTING TABLES
Mayline Wood Four Post Drawing Tables are crafted to top-grade Appalachian Red Oak, kiln-dried and cut for true, square corners. Joints are reinforced with bolted steel dowels for extra precision and rigidity. Drawer slides on wooden drawer runs. Hardware is black, drawer pulls are solid oak. The tilt angle is 50° to horizontal.
Finishes: Standard _X5 Naturalist, -Y5 Golden Oak, -55 Warm Oak.
MAY7704B 37½ X 48 1121.00
MAY7706B 37½ X 60 1164.00
MAY7707B 37½ X 72 1250.00
MAY7708B 43½ X 72 1318.00
MAY7709B 43½ X 84 1439.00
Auxiliary Drawer Unit for Wood Four-Post File Drawer and Supply Drawer.
MAY7715 655.00
Mayline Forester Wood Four-Post Table is made of solid beech with a natural finish. It has a large storage area under the hinged board and a thermally fused woodgrain melamine top.
Finish: _X5 Naturalist.
MAY7603F 30 X 42 462.00
MAY7604F 37½ X 48 537.00
MAY7606F 37½ X 60 572.00
Super Spiroboard Plus is, in addition to the standard Spiroboard, equipped with a Spiroliner parallel ruling/cutting straightedge and a factory installed vinyl board cover.
SPRSP24 18 X 24 157.75
SPRSP26 21 X 26 175.75
SPRSP30 24 X 30 198.25
SPRSP36 24 X 36 221.25
SPRSP42 30 X 42 263.00
Deluxe Spiroboard Plus is a professional graphics workstation which offers the ultimate in equipment, features and quality - all combined with portability. The Deluxe Spiroboard comes equipped with a Spiroliner parallel ruling/cutting straightedge, a 5-ply Spirotex vinyl board cover, Spiroll's new Spirotray which doubles as an instrument tray and/or drawing protector and a carrying handle/adjustable angle leg combination. Everything factory installed and ready for immediate use.
SPRD24 18 X 24 209.50
SPRD26 21 X 26 216.25
SPRD30 24 X 30 244.25
SPRD36 24 X 36 272.25
SPRD42 30 X 42 319.25
PORTABLE DRAWING BOARDS
Mayline Professional Drawing Kit
Laminated Wood - Transparent Edge Kit Rule.
MAY8109C 18 X 24 81.00
MAY8111C 15 X 20 76.00
MAY8112C 21 X 26 85.00
MAY8113C 24 X 30 103.00
MAY8114C 24 X 36 112.00
MAY8115C 30 X 42 140.00
Melamine Top - Transparent Edge Kit Rule.
MAY8109CP 18 X 24 81.00
MAY8111CP 15 X 20 76.00
MAY8112CP 21 X 26 85.00
MAY8113CP 24 X 30 103.00
MAY8114CP 24 X 36 112.00
MAY8115CP 30 X 42 140.00
Spiroboard Portable Boards feature a unique carrying handle/leg combination which may be adjusted to four positions providing several different board angles. They may be placed on the surface of your desk or tilted over the edge to provide the user with a variety of board angles from flat to 40°.
Spiroboards are constructed of solid core material with a durable melamine surface which resists scratching and is easy to clean. They come in a variety of sizes and are available with or without Spiroll's exclusive line of professional straightedges, vinyl board covers and drawing protector/instrument trays as described below.
Basic Spiroboard is equipped only with the carrying handle/leg combination.
SPRB24 18 X 24 62.50
SPRB26 21 X 26 72.00
SPRB30 24 X 30 84.75
SPRB36 24 X 36 94.25
SPRB42 30 X 42 115.75
Spiroll Document Stand holds reference drawings and other documents vertically at the ideal viewing level. Stand may be placed on top, or over the edge of the table and adjusted to the height and angle ergonomically correct for each individual. Documents are instantly secured when inserted up into the horizontal slot at the top of the stand and quickly removed. Documents may be flipped over the top of the stand to provide access to each one individually. The portable easel stand folds to become carrying handle and the legs adjust to provide several different angles.
SPRDS24 18" X 24" 139.75
SPRDS30 24" X 30" 187.50
SPRDS36 24" X 36" 214.25
SPRDS42 30" X 42" 254.50
Koh-I-Noor Portable Drawing Board is 14" X 19½" and molded in lightweight, white plastic and is durable enough to withstand compass points and continuous use. Ideal for student or professional in the classroom, field, home or office. Fits easily on desk, table or lap. Transparent, "professional grey" straightedge locks in any position around a full perimeter guide rail for either horizontal or vertical ruling. Takes paper sizes up to 11" X 17". Corrugated vinyl carrying case with handle included.
KOH25434 79.00
Replacement Straightedge with double locking mechanism for use with drawing board.
KOH25436 21.95
Drawing Head (optional) attaches easily to straightedge of drawing board to increase versatility. Automatically sets and locks in 15° increments, locks at any angle.
KOH25445 32.95
Aero-Core Drawing Boards are lightweight boards. They have a smooth finish on both sides and come with a plain or metal edge.
Metal Edge
PIC8001-17 12" X 17" 20.05
PIC8001-21 16" X 21" 26.00
PIC8001-24 18" X 24" 31.00
PIC8001-26 20" X 26" 38.45
PIC8001-31 23" X 31" 45.85
PIC8001-36 24" X 36" 57.05
LIGHTBOXES AND TABLES
Encino Light Box is an adjustable tilting table model. The moveable front and rear edges are U-Shaped to provide built-in trough storage for pens, pencils, and other tools. The Encino Series are constructed with oak side panels. 5000° Kelvin color corrected bulbs are available. The EN1620AT model is a compact, lightweight portable unit with a tilt range of 0° to 10° and comes with two 15 watt bulbs.
GRDEN1620AT 16 X 20 4½ 225.00
The EN1825AT model comes complete with Two-20 Watt Bulbs and has a tilt range of 0° to 40°.
GRDEN1825AT 21 X 29 X 5½ 329.00
Mayline Portable Light Boxes feature a tough 3/16" plexiglass top, tilting legs, non-slip feet and convenient carrying handle. The inner chassis is white enameled aluminum for efficient light dispersion.
MAY8183 11 X 18 190.00
MAY8184 16 X 18 308.00
MAY8185 18 X 24 408.00
MAY8186 24 X 36 550.00
LIGHT TABLES
Mayline/Hamilton Futur-Matic Light Table incorporates all automatic features of the Mayline Futur-Matic drafting table. The light box has a vented ballast section for a cool working surface. Four fluorescent tubes with solid state, full range dimensioning control. Standard Color: Black
Overall Size Working Surface
MAY8694BLT 37½ X 48 30 X 36 3721.00
MAY8696BLT 37½ X 60 30 X 48 3849.00
Mayline/Hamilton Wood 4-Post Light Table is solid hardwood construction with two 30 watt T-8 fluorescent bulbs with solid state, full range dimming control. Table is 37" high and the tilt angle of the top is adjustable from 0° to 50°.
Finishes: Standard _X5 Naturalist, -Y5 Golden Oak, -55 Unfinished.
Overall Size Working Surface
MAY7704LT 37½ X 48 30 X 36 2397.00
MAY7706LT 37½ X 60 30 X 48 2541.00
Mayline/Hamilton Ranger Steel 4-Post Light Table is similar to the wood table, but with a steel base. Overall size is 37½ X 60 with working surface of 30 X 48.
Standard Colors: -G5 Whiite, - M5 Desert Sage, - P5 Gray.
MAY7736BLT 2380.00
Encino Light Table adjustable tilt floor model has deeply recessed front and rear cabinet panels for maximum knee space. The light box has a tilt range from 0° to 40°. Cool white fluorescent lighting.
With Three 30 Watt Bulbs, Glass Size 30 X 40.
GRDEN3040AF 33 X 40½ X 44½ 1025.00
Vemco V-Track 612 Track Drafting Machine has the following features:
- Double pivot allows protractor to adjust to contours of drafting surface thus keeping scales flat at all times.
- Vertical and horizontal brakes control movement of the protractor.
- Head lifter positions protractor approximately ½" above the drawing surface to protect against smearing of tearing or drawing media.
- Available in Model 4 Versagraphic protractor or Model 3 Civil Engineering protractor.
Available in left or right hand models.
813 Model 3 Head
VEM3750-813 37½ X 50 656.00
VEM3754-813 37½ X 54 660.00
VEM3760-813 37½ X 60 668.00
VEM3772-813 37½ X 72 680.00
VEM4360-813 43½ X 60 685.00
VEM4372-813 43½ X 72 697.00
VEM4384-813 43½ X 84 725.00
VEM4396-813 43½ X 96 752.00
814 Model 4 Head
VEM3750-814 37½ X 50 656.00
VEM3754-814 37½ X 54 660.00
VEM3760-814 37½ X 60 668.00
VEM3772-814 37½ X 72 680.00
VEM4360-814 43½ X 60 685.00
VEM4372-814 43½ X 72 697.00
VEM4384-814 43½ X 84 725.00
VEM4396-814 43½ X 96 752.00
DRAFTING MACHINES
TRACK DRAFTING MACHINES
Vemco V-Track 630 Track Drafting Machine has the following features:
- Full view protractor with right-reading figures has black anodized finish causing less eyestrain.
- Central indexing system with ergonomically designed handle allows complete control of the 15° indexing system.
- Standard baseline has a five minute vernier and allows rapid setting of secondary baseline for isometric or view drawings.
- Lifter allows protractor and scales to be suspended approximately ½" above the drawing surface to protect against smearing or tearing of the media.
- Stainless steel bearings roll on stainless steel surfaces with die-cast aluminum carriages.
Available in left or right hand models.
VEM3750-61 36-37½ X 48-50" 680.00
VEM3760-61 36-37½ X 60 691.00
VEM3772-61 36-37½ X 72 710.00
VEM4360-61 42-43½ X 60 712.00
VEM4372-61 42-43½ X 72 731.00
VEM4384-61 42-43½ X 84 757.00
VEM4396-61 42-43½ X 96 783.00
VEM43120-61 42-43½ X 120 873.00
Vemco V-Track 512 Track Drafting Machine has the following features:
- New double pivot joint allows scales to lie flat in spite of a marginally warped surface.
- Protractor is divided into single degrees. The double five minute vernier permits angular accuracy to 1/12 of a degree; numbering is 0 to 90 degrees in quadrants and is placed on protractor so numerals are perpendicular to any baseline to which the machine is oriented.
- Convenient baseline brake handles releases and adjusts the protractor and 15° indexing mechanism to any orientation while the scale arms can be rotated around them.
Available in left or right hand models.
VEM3242-725 30-32 X 40-42 615.00
VEM3250-725 30-32 X 48-50 622.00
VEM3750-725 36-37½ X 48-50 625.00
VEM3756-725 36-37½ X 54-56 636.00
VEM3760-725 37½ X 60 652.00
ELBOW TYPE DRAFTING MACHINES
Vemco Models 2100, 3100, 4100, 5100 Elbow Drafting Machines have the following general features:
n Reversible elbow permits using drafting head to right or left of anchor clamp.
n Continuous steel bands for free motion over drawing board.
n Disc brake steadies lower arm on inclined board.
n Arms pivoted in brackets to let scales lie flat.
Model 2100 is used for mechanical, architectural and general purpose drafting.
Model 3100 is a civil engineering drafting machines.
Model 2100 and 3100 are equipped with disc brakes at the elbow to be used with boards not angled more than 10-15 degrees.
Model 4100 and 5100 are exactly like models 2100 and 3100 except for the addition of a gravity compensating adjustable counterpiece which allows use up to 20-25° board tilt.
VEM4100/24 36 X 60 450.00
VEM4100/30 42 X 84 480.00
VEM5100/24 36 X 60 480.00
VEM5100/30 42 X 84 510.00
- Designed for use on boards inclined more than 10-15 degrees.
- Automatic 15° indexing with lock-out for intermediate angles.
- Index plate is hardened and ground to accuracies as close as one minute of arc. Indexing is 0-90 degrees in quadrants.
- Disc brake at clamp steadies upper arm on inclined board.
- Vernier reads to 5 minutes of arc.
Available in left or right hand models.
VEM3500/16 24 X 36 344.00
VEM3500/18 28 X 40 346.00
VEM3500/20 34 X 44 348.00
VEM3500/22 38 X 50 350.00
DRAFTING MACHINE SCALES
Vemco Machine Scales with the exception of the P-38 are fully divided with numbering and graduations along their full length. All scales are available in 12" (300mm) or 18" (450mm) lengths.
Series "P" Scales are constructed of clear acrylic with graduations and numbers on underside of the scale to eliminate parallax distortion. A raised rib protects graduations and prevents capillary action when inking.
Ungraduated Straightedges
VEMP7012 12" 15.00
VEMP7018 18" 17.00
Graduated Scales
12" Scale 18.00
18" Scale 20.00
Antiflex® Series "AP" Scales combine the best qualities of the aluminum and plastic materials. Clear edges are molded to a rigid aluminum rib.
Ungraduated Straightedges
VEMAP7012 12" 21.00
VEMAP7018 18" 23.00
Graduated Scales
12" Scale 23.00
18" Scale 26.00
Graduated Scale Selection:
P, AP - 1 Full size to 1/32 in.
Half size to 1/16 in.
P, AP - 2 Full size to 1/16 in.
Half size to 1/16 in.
P, AP - 3 Half size to 1/16 in.
¼ size to 1/8 in.
Full size to 1/32 in.
P, AP - 4 ¼ size to 1/8 in.
1/8 size to ¼ in.
P, AP - 11 10 parts to 1 in.
50 parts to 1 in.
P, AP - 12 20 parts to 1 in.
40 parts to 1 in.
P, AP - 13 30 parts to 1 in.
60 parts to 1 in.
P, AP - 15 Full size to 1/50 in.
Half size to 1/10 in.
P, AP - 21 Full size to 1/32 in.
Full size to 1/50 in.
P, AP - 22 Half size to 1/16 in.
Full size to 1/32 in.
Half size to 1/25 in.
Full size to 1/50 in.
P, AP - 31 1½ in. = 1 ft.
3 in. = 1 ft.
P, AP - 32 3/8 in. = 1 ft.
¾ in. = 1 ft.
P, AP - 33 ½ in. = 1 ft.
1 in. = 1 ft.
P, AP - 34 1/8 in. = 1 ft.
¼ in. = 1 ft.
P, AP - 35 1/8 in. = 1 ft.
¼ in. = 1 ft.
½ in. = 1 ft.
1 in. = 1 ft.
P, AP - 36 3/8 in. = 1 ft.
¾ in. = 1 ft.
1½ in. = 1 ft.
3 in. = 1 ft.
P, AP - 37 1/8 in. = 1 ft.
¼ in. = 1 ft.
3/16 in. = 1 ft.
3/8 in. = 1 ft.
P, AP - 38 1/8 and ¼ in. = 1 ft.
½ and 1 in. = 1 ft.
AP80 ADVANT-EDGE® Full size to 1/32 in.
6 and 12 point pica.
VEMAP8012 12" 34.00
VEMAP8018 18" 36.00
PARALLEL RULES
Mayline Parallel Rule Straightedges have a black, phenolic laminate base with a transparent blade insert for see-through registration and fine line quality. Mounting hardware and cable included.
Mobile Parallel Rule with Stainless Steel Rollers, recommended for use paper and vellum.
MAY7260A 30" 82.00
MAY7261A 36" 90.00
MAY7262A 42" 102.00
MAY7263A 48" 112.00
MAY7264A 54" 126.00
MAY7265A 60" 137.00
Mayline Mobile "D" Parallel Rule with Delrin Rollers, for use with drafting film.
MAYD7260A 30" 82.00
MAYD7261A 36" 90.00
MAYD7262A 42" 102.00
MAYD7263A 48" 112.00
MAYD7264A 54" 126.00
MAYD7265A 60" 137.00
Mayline Mobile Parallel Rule with Armoredge® and Delrin Rollers, designed to resist nicks and dents from drawing tools.
MAYD7260ASE 30" 105.00
MAYD7261ASE 36" 113.00
MAYD7262ASE 42" 130.00
MAYD7263ASE 48" 144.00
MAYD7264ASE 54" 161.00
MAYD7265ASE 60" 177.00
Spiroll Spirolinerâ are elevated slightly above surface of the drawing table. the Spiroliner does not contact the drawing. The durable anodized surface has a cutting edge that is "nick proof". Two tracking systems provide friction braking and dual locking simultaneously.
SPRSL24 24" 84.75
SPRSL26 26" 89.75
SPRSL30 30" 97.50
SPRSL36 36" 106.00
SPRSL42 42" 119.25
SPRSL48 48" 131.50
SPRSL54 54" 145.25
SPRSL60 60" 160.75
SPRSL72 72" 183.00
DRAWING BOARD ACCESSORIES
Spiroll® Drawing Protector is used for easy slide away protection of the drawing currently being completed. It protects the drawing from elbow smudging. It can be used with all conventional instruments including parallel straightedges, T-squares, and drafting machines.
SPRPA36 36" 76.00
SPRPA42 42" 84.25
SPRPA48 48" 91.75
SPRPA54 54" 99.75
SPRPA60 60" 107.25
SPRPA72 72" 117.00
Spiroll Replacement Parts
SPREC-1 Plastic End Caps 3.75
SPRCB-1 Cleaning Brush 2.50
SPRRC-1 Parallel Rule Clip 2.50
Straightedge Brake locks the straightedge into position enabling complete freedom of hands for use of lettering or inking. Also prevents loss of position due to bumping or adjusting table. (Standard on all new straightedges).
MAY7305 19.00
Replacement Cable cut to length coils. Saves time in measuring, cutting and coiling.
MAY7355A for 30"-42" 12.00
MAY7355B for 48"-60" 14.00
MAY7355C for 72"-96" 21.00
Cable for all types of parallel ruling attachments. Stainless Steel Cable with nylon coating.
MAY7355100 100' 35.00
Repair Kit contains replacements parts for Mayline straightedges. Does not include cable.
MAY7306 17.00
Mayline Repair Kits contain replacement parts for an above board straightedge. Includes cable.
MAY7301A 30" to 42" 37.00
MAY7301B 48" to 72" 39.00
MAY7301C 84" to 96" 42.00
Mayline Mobile Roller Repair Kits contains replacement rollers, plugs and a punch to remove disc screws holding cap to base. Step by step instructions are included.
Metal Rollers
MAY10706A for 30"-42" 17.00
MAY10706B for 48"-60" 20.00
MAY10706C for 72"-96" 32.00
Delrin Rollers
MAY10706D for 30"-42" 18.00
MAY10706E for 48"-60" 23.00
MAY10706F for 72"-96" 35.00
Individual Replacement Parts
MAYV11 Spring 1.80
MAY10651 Pulley Plate with Lock 4.50
MAY10652 Pulley Plate without Lock 4.00
MAY10653 Front Stops 3.00/Pair
Storage Fan is a unique accessory which attaches securely to all table tops. It lets you keep your art tools at hand. Conveniently holds markers, templates, triangles and reference materials. Can be used at practically any table angle. 36" length.
PIC148SF36 36" 36.90
Pencil Tray offers sturdy, convenient storage. Its 2½" wide tray area is perfect for pens, pencils, erasers, scales - just about anything you can think of.
PIC146PT36 36" 22.70
PIC146PT42 42" 24.45
PIC146PT48 48" 26.05
Utility Tray offers additional space right where it is needed for a variety of small drawing accessories. It has sixteen compartments of different sizes. Mounts easily to either side of table. Made of ABS plastic. Size: 7" wide by 31½" long.
ALVTT4991 White 29.95
ALVTT4992 Black 29.95
BOARD COVER CLEANER
Graphic SecretÔ Board Cleaner cleans and restores vinyl drawing board covers, marker boards, light tables, vacuum frames, overhead projector stages, cylinders of diazo and blueprint machines. It removes ground-in graphite, ink, and tape residue. Cleaner is non-toxic, biodegradable, and has a pleasant citrus scent.
ALVS00309 2 oz. bottle 7.65
ALVS00313 16 oz. can 18.95
BOARD COVERING
BORCO Vinyl Board Cover is 5-ply strong and bonded to provide a practically indestructible work surface, BORCO board cover will never chip, crack, or peel. Each sheet is completely reversible. Self-healing BORCO provides a smooth, clean writing and drawing surface. Colors available include green/ivory, white/gray and green/white.
Ttranslucent BORCO is ideal for use on light tables, cross-section grid paper, graphs and charts, or protect while revealing the rich wood surface of your drawing board.
Specify Sheet Size when Ordering.
Green/Ivory Price/Lineal Foot
SAF471031 31" 8.50
SAF471036 36" 8.50
SAF471037 37½" 8.95
SAF411042 42" 9.80
SAF471043 43½ 10.10
SAF471048 48" 10.85
Green/White
SAF471731 31" 8.50
SAF471736 36" 8.50
SAF471737 37½" 8.95
SAF471742 42" 9.80
SAF471743 43½ 10.10
SAF471748 48" 10.85
White/Gray
SAF471736 36" 8.50
SAF471737 37½" 8.95
SAF471742 42" 9.80
SAF471743 43½" 10.10
SAF471748 48" 10.85
Translucent
SAF471636 36" 8.50
SAF471637 37½" 8.50
SAF471642 42" 9.80
SAF471643 43½" 9.80
Borco Double-Sided Tape is a special, thin, double-coated tissue paper tape with adhesive on both sides, protected by silicone paper. It is ideal for affixing BORCO board cover to drawing boards or tables.
SAF471325 1" X 25 Feet 3.50
Coolcombo, Combination Task Lighting us the advanced alternative to older "hot" incandescent combination lamps. Combines two colors of fluorescent light to achieve optimal color balance for accurate color perception. Compact fluorescent 13-watt quad provides incandescent color to blend with 22-watt cool white circline. 3-conductor cord. Available in Black, All-white, Almond, Dove Gray.
DAZ8CB400 Desk - 26" Reach 265.00
DAZ8CB450 Clamp - 26" Reach 240.00
DAZ8CB500 Clamp - 40" Reach 240.00
Dazor Twin-Tube Fluorescents
(Compact) uses 13-watt compact fluorescent tubes to produce a broad light distribution for large desks, drawing boards, and work tables. A high luster mirror reflector gives maximum light output. Latest in long-life, energy efficient lighting technology. 3-conductor cord. Available in Black, All-white, Almond, Dove Gray.
DAZ8FL400 Desk - 30" Reach 235.00
DAZ8FL450 Clamp - 30" Reach 210.00
DAZ8FL500 Clamp - 44" Reach 210.00
(Traditional) similar to the above but the light source consists of two F15T8 fluorescents. Includes a high power factor capacitor to eliminate annoying lamp flicker, and to provide more efficient use of electrical circuits by reducing amperage requirements. Advanced lamp holders lock tubes in place and shield contact points at tube ends to prevent accidental shock. 3-conductor cord. Available in Black, All-white, Almond, Dove Gray.
DAZ8FL100 Desk - 30" Reach 235.00
DAZ8FL150 Clamp - 30" Reach 210.00
DAZ8FL200 Clamp - 44" Reach 210.00
LAMPS
Vemoclite VL4C Lamp attaches either directly to a drawing board or a desk and to most Vemco and Mutoh drafting machines (with a special attachment). After adjustment the Vemcolite maintains its position relative to the slope of the drawing surface. Both incandescent and fluorescent light combine to provide balanced illumination. Available in Black.
ARSVL4CPBK 199.95
Luxo LC1/A Combo Lamp has both 20 watt circline fluorescent and 100 watt incandescent bulbs which can be used together or singly to provide daylight type color. The 45" arm gives full range of reach and adjustment. The heavy-duty aluminum shade has 9½ diameter for broad area lighting and cool work surface. Available in Black, White, Oyster and Light Gray.
LUXLC1A 220.00
Dazor Combination Lamp has the cool power of fluorescent plus the intensity of incandescent lamps work together in this 3-way air-cooled lamp. Use one light source or the other, or use them together for optimum color. The 34" floating arm holds light where it is needed. Available in All-White, Black, Dove Gray and Almond.
DAZ2C2134 196.00
Dazor Fluorescent Lamps, the traditional lamp with 2-15 watt fluorescent tubes to give shadow free lighting to the work surface. Rugged all-metal construction; 3-conductor cord set; lamp comes complete with cool white bulbs. Available in All-White, Black, Almond, Dove Gray.
DAZ2134 171.00
Dazor Asymetria Lamp is a slick, stylish, contemporary lamp. It operates with a soft, warm, natural color, a compact fluorescent tube whose output is comparable to 75 watt incandescent bulb. It has a 34" arm with three separate tension control knobs that provide smooth arm movement. Available in All-White and Black.
DAZ2701 Clamp 65.00
DAZ2702 Desk Base 78.00
Luxo LS1/A Lamp has a rotary switch and uses up to a 100 watt incandescent bulb. The heavy-duty aluminum rolled-edge shade is 8" diameter for broad area lighting. The inner deflector optimizes light output and distributes illumination evenly across work area and deflects heat to keep the work surface cool. The 45" arm gives full range of reach and adjustability. Available in Black, White, Oyster, Light Grey.
LUXLS1A 148.00
Dazor Kitka Lamp is a Scandinavian designed incandescent lamp. It functions superbly on contemporary art and drafting boards. The 34" arm gives it the ability to reach over the entire board. Available in White, Black, Cream and Red.
DAZ2801 Clamp 31.00
DAZ2802 Desk Base 42.00
MAGNIFYING LAMPS
Luxo KFM Series Magnifier the arms do not have external springs, the lens is 5" diameter, either a 3 diopter or 5 diopter. Cones with a 22 watt fluorescent tube. The arm has a 45" reach with a clamp for mounting to horizontal surfaces. Also includes an industrial grade splash guard/diffuser. Available in Black, White, Oyster and Light Grey.
LUX17113 3 Diopter 270.00
LUX17115 5 Diopter 285.00
LUXO MOUNTING BRACKETS
A-Bracket edge clamp for horizontal surfaces. Available in black, white, oyster and light gray.
LUX50001 14.00
B-Bracket screw mount for vertical surfaces. Available in black, white, oyster and light gray.
LUX50003 14.00
D-Bracket for edge mounting on inclined surfaces and drafting boards. Available in black, white, oyster and light gray.
LUX60016 22.00
E-Round Weighted Base aluminum covered, 8 1/2 lb. Desk-top base. Available in black, white, oyster and light gray.
LUX50008 65.00
DRAFTING STOOLS
Mayline 6400 Series for all positions, i.e. leaning forward, backward, and sitting upright. It's a full featured chair with non-slip back height adjustment, full forward and rear articulation with infinite lock, forward tilt/lock mechanism, and torsion spring tension control. Seat height is pneumatically adjustable for people with either long or short legs. All features work together to maintain the back's natural S-curve for maximum comfort and productivity through a wide range of motion. Fifteen fabric options available.
Office Desk Height 16" - 21"
MAY6400 Without Armrest 654.00
MAY6401 With Armrest 805.00
Drafting Table Height 21.75" - 29.50", With Footrings.
MAY6402 Without Armrest 678.00
MAY6403 With Armrest 829.00
SAFCO Highland Task Chair is a high quality chair that features a plastic shell casing on the seat and backrest. It has pneumatic seat height adjustment, articulating seat and back, and back height adjustment. The five-spur base with dual hooded casters ensures easy mobility.
Drafting Height 24" - 31"
SAF3440BL Black 344.00
SAF3440GR Gray 344.00
SAF3440BG Burgundy 344.00
Mid Range Height 19" - 26"
SAF3441BL Black 344.00
SAF3441GR Gray 344.00
SAF3441BG Burgundy 344.00
Optional Arms
SAF3499 Adjustable Arms 79.00
Monarch Executive Chair is designed for the ultimate seating comfort. Ergnomic features, that provide lumbar support, include: a contoured 2 ½" padded backrest that adjusts forward and back and higher or lower; 19" X 17" seat cushion; optional Adjustable Comfort Fit Armrest, that adjusts to arm comfort level. It has one lever that adjusts the seat and back to tilt forward or back with ease. The other lever is a pneumatic fingertip adjustment that raises the chair from 18" to 23". Hooded dual casters for easy mobility attached to a five star prong base for added stability.
ALVCH555-34 Charcoal 285.00
ALVCH555-46 Burgundy 285.00
ALVCH555-60 Medium Gray 285.00
Height Extension/Conversion Kit contains an extra-strong, extra-wide diameter (22") footring which can be adjusted to the desired height and then locked into position. Adds 9" of height.
ALVCK49 39.50
Adjustable Comfort Arm Rests provide six different comfortable positions, by adjusting up or down at ½" increments with a turn of the Cam Knob on the outside of the arm support. Molded in Black cushion plastic with contoured grip.
ALVCH55A 60.00
3401 Drafting Stools have a chrome pneumatic lift for height adjustment. The seat is contoured with a "waterfall" edge to aid in circulation. The base has five-spurs made out of heavy gauge steel and chrome plating. The backrest height and angle can be manually adjusted. The casters are dual hooded nylon.
SAF3401BL Black 210.00
SAF3401GR Gray 210.00
United D-41 Traditional Drafting Chair has a spring back specifically for those needing comfort and support. The seat is cloth upholstered with vinyl trim and the back rest is vinyl. Five bladed base with 2" dual wheel casters. Height adjusts from 19" to 27".
UNCD41LCBK Black 209.00
UNCD41LCGY Gray 209.00
UNCD41LCGN Green
3390 Economy Drafting Chairs have a pneumatic seat height adjustment from 24"- 31". A five star black nylon base. The footring, seat depth and back height are all adjustable. Seat rotates a full 360 degree swivel. Available in black and dark gray.
SAF3390BL Black 149.00
SAF3390DG Dark Gray 149.00